For Aluminum Fencing: Panels slide into precut holes in the posts and are secured with self-tapping screws (screws included with post)and placed approx. 3/8″ from the edge of the post to be able to make contact with the rail. Panels are inserted into holes that allow the fence to rest 2″ above the ground level. Gates are installed between End/Gate Posts, which are heavier gauge tube to allow for the weight of the gate and the movement of the gate being opened and closed. Instructions are included with each gate sold. All panels, posts and gate are sold separately. All hardware needed for installation is included with the gate. For installations other than in-ground, you may need to purchase a special flange adapter (deck mount) for use with wood or concrete.
